USB 3.2 Receiver Calibration and Test Automation Software (GRL-USB32-RXA)
Quickly test your Receiver BER and Jitter Margin to the USB 3.2 Gen1 and Gen2 CTS
DescriptionGRL’s USB 3.2 Receiver Calibration and Test Automation software for the Anritsu MP1900A (GRL-USB32-RXA) provides an automated, simple and efficient way to test your USB 3.2 Gen1 (5G) and Gen2 (10G) Receiver. GRL-USB32-RXA automates the Anritsu MP1900A BERT and Keysight or Tektronix real-time oscilloscope to calibrate the stressed eye opening and test receiver compliance and jitter tolerance. Following the standard test methodology outlined in the USB 3.2 Electrical Compliance Test Specification, GRL-USB32-RXA provides a simple user interface to automate complex USB testing. The software runs on any Windows 7+ PC or oscilloscope, and significantly reduces equipment calibration time. GRL-USB32-RXA supports USB 3.2 Gen1 (5Gb/s) and Gen2 (10Gb/s) data rates. Including test setups for USB Type-CTM, or USB Type-A/B Connectors. The software guides the user through complex setups required by the CTS for the BERT, USB-IF Test Fixtures, Oscilloscope, and Device Under Test. The Software automatically calibrates Amplitude and Pre-Emphasis; then Jitter and Eye parameters using USB-IF SigTest software. After calibration, GRL-USB32-RXA automates loopback negotiation and Symbol Error Rate (SER) using the built-in capabilities of the MP1900A3.2.
- Support USB 3.2 Gen1 (5 Gb/s) and Gen2 (10 Gb/s) Host and Device receiver jitter tolerance tests
- Automated calibration of signal impairments to achieve stressed Receiver Eye Height and Eye Width in accordance with USB 3.2 Specification using SigTest
- Connection diagrams for all Host/Device, USB Type-C or Type-A/B Connector Types using USB-IF 3.2 test fixture kits
- Simple setup, test execution, and reporting in PDF files
- Fully configurable and customizable
- Automation of BERT functions Including: transmit and receive LFPS and LBPM signals; transition Host and Device status to loopback; insert and identify Skip Ordered Set; measurement of BER using Compliance Test Pattern
GRL-USB32-RXA – Granite River Labs USB 3.2 Receiver Calibration and Test Automation Software Prices are subject to change without notice.
USB 3.2 Receiver Calibration and Test Automation Software (GRL-USB32-RXA).